How-To: Q10 Firmware Update

Download HMX-Q10 Firmware

The Q10 firmware upgrade will extend the function of the Switch Grip. Before
this firmware upgrade, the Switch Grip was only supported while on standby mode,
but this firmware upgrade enhances the Q10 Switch Grip functions allowing you to
switch your grip while recording or while on pause mode. What an exciting news
to all the Q10 users! Download the firmware and upgrade your Q10 now to start an
amazing experience.
There are two ways to upgrade to Q10 firmware: One is to upgrade through
Intelli-studio and the other way is to upgrade through the website. We’ll walk you
through the upgrading process. We’ll walk you through the upgrading process.
Please follow the procedures step by step.
:: How to upgrade Samsung Q10 Firmware
(Video)


#1. Firmware upgrade using
intelli-studio
si_q10_firmware_03
1. Connect the camcorder to the computer.
2. Pop-up window will open.
Click on ‘Run iStudio.exe’.
3. When intelli-studio opens, click ‘web-support’
from the menu controls at the top.
4. Click on ‘Upgrade firmware for the
connected device’.
5. Check the ‘Update camera/camcorder F/W’ window, check
the message then click ‘next’ to move on to the next step.
6. Once the update
process is completed, disconnect the USB and turn the camcorder off.
7. Turn
the camcorder back on and when ‘Upgrade
firmware now
?
’ message pops up, choose Yes to upgrade the
firmware.
8. Once the upgrading is done, the camcorder automatically turns
itself off.
9. Turn the camera back on. Go to Settings>General>Default
set and complete the firmware upgrade.
#2. Firmware upgrade via samsung.com
si_q10_firmware_04
Connect to Samsung.com. Click
on the following link(Q10 Firmware) and you’ll see the page above. Apply the
following steps to upgrade firmware.
1. Before you start, you have to format the memory card. Put the memory card
into the camcorder and format the memory card.
2. Download the
‘q10.firmware.bin’ file from the website and copy it to the
formatted memory card.
3. Connect the camcorder to the computer using an AC
adapter.
4. Insert the memory card with the q10.firmware.bin file into the
camcorder. Flip open the LCD screen (the camcorder will be automatically turned
on) and the following message will appear.
“Upgrade firmware now?”
Choose
“Yes”, and it will take
about 5 minutes to complete the upgrade.
5. Once the upgrading is done, the camcorder automatically turns itself off.
Remove the memory card and turn the camera back on.
6. Go to
Settings>General>Default set and complete the firmware upgrade.
* Click on the following link to download firmware. To download the Q10
Firmware,click here.
After the firmware upgrade, you can switch your grip while recording or while
on pause mode.
Good luck!
Thanks.

태그: , , , , , , ,

One Response to “How-To: Q10 Firmware Update”

  1. best note taking app Says:

    I loved as much as you will receive carried out right here.
    The sketch is attractive, your authored subject matter stylish.
    nonetheless, you command get bought an impatience over that you wish be delivering the following.
    unwell unquestionably come further formerly again since exactly the same nearly a lot
    often inside case you shield this increase.

답글 남기기

아래 항목을 채우거나 오른쪽 아이콘 중 하나를 클릭하여 로그 인 하세요:

WordPress.com 로고

WordPress.com의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

Twitter 사진

Twitter의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

Facebook 사진

Facebook의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

Google+ photo

Google+의 계정을 사용하여 댓글을 남깁니다. 로그아웃 / 변경 )

%s에 연결하는 중


%d 블로거가 이것을 좋아합니다: